5G LTE Outdoor antenna 10 dBi - Directional antenna for routers & repeaters (CoFlex1000-5G)

Strong 5G/4G performance with the CoFlex1000-5G outdoor directional antenna

The CoFlex1000-5G directional antenna from Halo&Son Austria gives you better reception for your router or repeater - even in difficult signal conditions. With up to 10 dBi gain, this outdoor antenna is perfect for rural areas, halls, mobile homes or industrial environments. It supports 3G, 4G/LTE, 5G as well as LoRaWAN and 2.4 GHz WLAN/Bluetooth.

Important note on use:

This antenna can only be used with devices that have a single antenna connection. A separate antenna cable is required for connection to your end device, e.g. the CoFlex2700-5-SMAM-NM-S-1 with N connector (male) on the antenna side.

Technical data:

• Gain: 9-10 dBi
• Frequency ranges: 698-960 MHz / 1710-2700 MHz / 3400-3800 MHz / LoRaWAN EU868 & US915 MHz
• Supported applications: GSM, 2G, 3G, 4G, LTE, 5G, 2.4 GHz WLAN, LoRaWAN Helium, Bluetooth
• VSWR: < 1.5
• Polarisation: vertical or ±45° (depending on mounting)
• Beam width: 65° (H) / 60° (V)
• beam height: 50° (H) / 40° (V)
• Impedance: 50 Ohm
• Material: UV-resistant ABS
• Colour: White
• Connection: N-Type Male
• Cable length: 15 cm RG58U
• Dimensions (L × W × H): 41 × 5 × 21 cm
• Application area: Indoor and outdoor use

Installation instructions:

The antenna is attached to the supplied L-bracket. The included U-clamps are suitable for masts up to 50 mm in diameter. Direct wall mounting is only possible with an optional pole bracket (not included).

Compatible devices (selection):

• Router with single connection: TP-Link MR6400, ZTE MF286, Teltonika RUT200 (SMA)
• GSM/LTE repeater: Models with N-Female connection
• LoRaWAN/Helium gateways: Bobcat Miner, Kerlink, Nebra, SenseCAP

Scope of delivery:

• 1× CoFlex1000-5G directional antenna
• 2× U-clamps for masts up to 50 mm Ø
• 1× L-bracket for attachment to mast or optional wall mast bracket